Image
View Page

HP 75

E-ONE’s HP 75 features an extruded aluminum ladder that exceeds NFPA requirements with a 2.5:1 structural safety factor. In addition, the aluminum aerial will not rust, need painting, or require rung cover replacement. The HP 75 delivers lower life-cycle cost than other aerials on the market.

Image
View Page

HP 78

E-ONE’s HP 78 features a 750 lb tip load for increased rescue capability and additional reach of similar products in its class. The ToughTruss™ ladder design features extruded aluminum construction that exceeds NFPA’s 1901 requirements with a 2.5 to 1 structural safety factor.

Image
View Page

METRO 100

100’ Reach. Single axle. Truck company. From E-ONE, the innovator of aluminum aerials, comes the Metro 100 – a highly maneuverable aerial ladder with a 100’ vertical reach. The LTH100 ladder is available with or without a pre-piped waterway.

Image
View Page

METRO 100 QUINT

The Metro 100 Quint with HR 100 Ladder is compact and maneuverable for tight streets. It features criss-cross under-slung jacks that require very little space to deploy. Based on the proven HM 100/110 design, the Metro 100 Quint features the ToughTruss ladder design with up to a 750 lb tip load.

Image
View Page

HR 100 TANDEM AXLE

The HR 100 with a tandem rear axle provides additional storage space and weight carrying than single rear axle units and is available as a Quint or Truck Company. The criss-cross under-slung jacks have a narrow 12’ spread that require very little space to deploy. The aerial features the ToughTruss ladder design with a 500 lb tip load (wet or dry).

Image
View Page

CR 100 LADDER

If tip-load and low-angle performance top your list of “must haves,” our CR 100 Ladder with an impressive 750 lb tip capacity for firefighters is your aerial. It utilizes our exclusive integral torque box chassis which provides a rock-solid foundation for the aerial. The crisscross under-slung jacks have a spread of only 13’8”, take less space to deploy and allow for more storage space that H-Style outriggers.

Image
View Page

CR 137

Buildings aren’t getting shorter. Fires don’t have a maximum height limit. So why should your aerial ladder only be 100’? Reaching more than 13 stories high, the CR 137 is North America’s tallest aerial ladder, and with its 13’8” crisscross under-slung stabilizers, the aerial sets up quickly.

Perhaps the most impressive feature of the CR 137 is it’s ability to reach a target that is 110’ high AND 80’ horizontally off the side while supporting a 750 lb personnel tip load.

Image
View Page

95-PLATFORM

E-ONE’s 95-Platform has a proven reputation for durability and reliability. The welded extruded aluminum construction provides a low total cost of ownership. The bucket features angled corners and a perimeter step to provide excellent egress. Underneath the 95-Platform is the E-ONE exclusive integral torque box chassis for industry leading strength. The 245” wheelbase provides great maneuverability and aerial set-up is fast with it’s 13’8” crisscross underslung outriggers.

Image
View Page

HP 95 MID-MOUNT PLATFORM

The HP 95 Mid-Mount platform is designed for departments that have travel height restrictions or prefer a centrally located turntable. The extruded aluminum aerial is exceptionally stable, and with only one set of extending stabilizers and auto-levelling system, is quick and easy to set up in tight locations. With waterway flows up to 2000 GPM and a large mid-ship pump, the HP 95 platform has excellent fire-fighting capability. The extruded aluminum body features a large ladder tunnel and 300-to-500-gallon tank.

Image
View Page

TYPHOON

The Typhoon® chassis boasts the same proven roll-cage cab design as all E-ONE custom chassis, offering five cab lengths, multiple seating configurations, various internal storage options, lighting packages and four vista roof heights. Engine choices encompass an impressive range from 330 to 600-HP with a 3000 or 4000 series Allison transmission.

Image
View Page

CYCLONE

The new E-ONE Cyclone® cab is ready to meet the needs of today’s fire departments with a rugged new design, superior ride and handling, and more interior space than ever before. The 100” wide cab offers more space for your crew with a generous 27” between door and engine cover for both driver and officer.

Image
View Page

CUSTOM eMAX

Our eMAX pump location and apparatus configuration is designed to offer maximum maneuverability with a short wheelbase; maximum storage space with up to 605 cubic feet of storage; maximum accessibility with low, pre-connected handlines and a rear access ladder; maximum fire/rescue with the ability to carry equipment necessary for fire, rescue and EMS response in one organized apparatus.

Image
View Page

eMAX URBAN INTERFACE

Take emergency response to the max, the eMAX. One of the industry’s most innovative apparatus designs, the eMAX, now meets the unique, diverse demands of urban interface. The Urban Interface eMAX offers maximum maneuverability with a short 168” wheelbase; maximum storage space for a configuration of this size with up to 340 cubic feet of storage.

Image
View Page

COMMERCIAL eMAX

Our eMAX pump location and apparatus configuration is designed to offer maximum maneuverability with a short wheelbase; maximum storage space with up to 605 cubic feet of storage; maximum accessibility with low, pre-connected handlines and a rear access ladder; maximum fire/rescue with the ability to carry equipment necessary for fire, rescue and EMS response in one organized apparatus.

Image
View Page

eMAX AERIALS

Our eMAX pump location and apparatus configuration is designed to offer maximum maneuverability; maximum storage space; maximum accessibility with low, pre-connected handlines; maximum fire / rescue with the ability to carry equipment necessary for fire, rescue and EMS response in one organized apparatus. When coupled with E-ONE’s proven extruded aluminum HP 75, HP 78 or HP 100 ladder designs, all these features combined allow you to maximize your performance with the eMAX by E-ONE.

Image
View Page

NON-WALK-IN RESCUE

E-ONE’s non-walk-in rescue can be used in a wide array of applications from technical rescue/multi-vehicle accidents, confined space/high-angle rescue, area illumination, extrication, wet rescue (with water and pump), Haz-Mat and USAR as well as many other disciplines. Maximum storage space and equipment capabilities in a heavy duty platform with large transverse storage solutions for extra gear is this rig’s specialty.

Image
View Page

WALK-IN RESCUE

The E-ONE walk-in rescue provides the space first responders need to efficiently store and utilize vital life-saving equipment. With a wide center walkway, countertops and large compartments, the interior of the E-ONE walk-in rescue allows first responders a spacious area to transport crew. This includes work stations and storage for specialized delicate equipment as well as a designated space for rehab or Haz-Mat operations control.

Image
View Page

COMBO RESCUE

The E-ONE combo rescue provides a blend of capabilities of both walk-in and non-walk-in rescue bodies. The rear body with all of the spacious storage features of the non-walk-in body joins a forward walk-in module for mission critical duties. Command, rehab, Haz-Mat or dive/swift water rescue are just a few of the duties the forward module can accommodate on-scene to elevate your response capabilities.

Image
View Page

LIGHT RESCUE

The E-ONE light rescue may be smaller than its big brothers, but don’t let that fool you. It has all of the capabilities of any of the E-ONE rescue line-up, but in a more compact size. Like all E-ONE apparatus, our light rescue body is designed with 3/16” extruded aluminum with a full main frame to offer one of the industry’s strongest light rescue bodies. Built for the long haul with a longer base service life, it offers future cost savings with easy re-chassis capabilities due to this superior body design.

Image
View Page

COMMAND CENTER

The E-ONE command center is a specialized rescue that provides a full suite of technology for communications and crisis command on-scene. Allowing cross functional control from all sectors involved in regional emergency services, these units are self-contained and provide the command and control required for extended service until the crisis or event is mitigated. Airports, refineries, forestry and law enforcement/homeland security first responders and others can count on the command center when it matters most.

Image
View Page

VM8 RESCUE PUMPER

E-ONE commercial rescue pumpers are available on two- or four-door Freightliner®, International®, or Spartan FC-94 chassis with all-aluminum 5052-h32 compartmentation and formed skeletal superstructure. A variety of tanks and pump sizes are available.

Image
View Page

CUSTOM PUMPER

E-ONE pumpers and rescue pumpers are the most versatile, durable pumpers on the market. Offering both 3/16” extruded aluminum and stainless steel bodies, tank sizes up to 1530 gallons and available on three of the industry’s strongest chassis, E-ONE pumpers will meet unique needs while exceeding expectations.

Image
View Page

AFT PUMPERS

Through years of experience and most importantly, rigorous listening to customers like you, E-ONE has developed a new line of Custom Pumpers that solve today’s real challenges.

Image
View Page

COMMERCIAL PUMPER

Image
View Page

CUSTOM TANKER

E-ONE custom tankers offer the versatility of high volume pumps and large tank capacities, and the dependability of an exceptionally durable custom chassis. A variety of tanks and pump sizes are available.

Image
View Page

COMMERCIAL TANKER

E-ONE commercial tankers are available on two- or four-door Freightliner®, International®, Peterbuilt® or Kenworth® chassis with all-welded extruded-aluminum body and poly tanks. A variety of tanks and pump sizes are available.

Image
View Page

WATER MASTER™ VACUUM TANKER

Turn lakes, streams and pools into usable resources. Developed by Fire Chief Reggie Ridgeway, the Water Master Vacuum Tanker allows a one-man crew to collect water from ponds, rivers, ditches and more and deliver it quickly to the scene.

Image
View Page

HP 100 PLATFORM INDUSTRIAL

E-ONE offers a proven track record in aerial safety with ZERO structural failures or tip-overs in more than 30 years of aerial production and our industrial platforms are no exception. With robust pump configurations to meet your industrial needs, E-ONE aerials offer performance and versatility that are second to none.

Image
View Page

CUSTOM INDUSTRIAL

With a wide assortment of foam and chemical systems, dual and single deck guns, E-ONE’s industrial custom pumpers are the most versatile, durable pumpers on the market.

Image
View Page

COMMERCIAL INDUSTRIAL

Offering both extruded aluminum and stainless steel bodies as well as foam tanks up to 3000 gallons, E-ONE industrial pumpers will meet unique needs while exceeding expectations.

Image
View Page

VECTOR

Energize your firefighting capabilities and protect your crews and the environment from air and noise pollution with Vector, the first North American-style fully electric fire truck. With the most powerful, longest-lasting battery performance on the market, this truck drives and pumps on electric power only—able to conduct 100% of ground duties with 100% electric. Customizable to meet your needs, Vector answers the call with cleaner, quieter operation.